Posts Tagged ‘static routing’

h1

RIP version 2, Static routing

Desember 20, 2009

Bikin konfigurasi RIP versi 2 gabung sama static routing… terdapat 3 buah router,, router palembang menggunakan konfigurasi RIP versi 2 dan Router Jakarta menggunakan Static Routing,, yang menghubungkan kedua router ini adalah Router Lampung…

Berikut isi command Line dari router-Router tersebut :

Router Palembang :

Router-Palembang(config)#interface serial 0/0/0
Router-Palembang(config-if)#ip address 192.168.1.1 255.255.255.252
Router-Palembang(config-if)#clock rate 64000
Router-Palembang(config-if)#bandwidth 1024
Router-Palembang(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down
Router-Palembang(config-if)#interface fa
Router-Palembang(config-if)#exit
Router-Palembang(config)#interface fa
Router-Palembang(config)#interface fastEthernet 0/0
Router-Palembang(config-if)#ip address 172.16.1.1 255.255.255.0
Router-Palembang(config-if)#ip address 172.16.1.1 255.255.255.0
Router-Palembang(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router-Palembang(config-if)#exit
Router-Palembang(config)#router rip
Router-Palemba(config-router)#version 2
Router-Palemba(config-router)#network 172.16.1.0
Router-Palemba(config-router)#network 192.168.1.0
Router-Palemba(config-router)#^Z
%SYS-5-CONFIG_I: Configured from console by console
Router-Palembang#copy run start
Destination filename [startup-config]?
Building configuration…
[OK]
Router-Palembang#

Router Lampung :

ROuter-Lampung(config)#interface serial 0/0/0

ROuter-Lampung(config-if)#ip address 192.168.1.2 255.255.255.252

ROuter-Lampung(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up

ROuter-Lampung(config-if)#in

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to

ROuter-Lampung(config-if)#exit

ROuter-Lampung(config)#interface fa

ROuter-Lampung(config)#interface fastEthernet 0/0

ROuter-Lampung(config-if)#ip address 192.168.10.1 255.255.255.0

ROuter-Lampung(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

ROuter-Lampung(config-if)#exit

ROuter-Lampung(config)#interface serial 0/0/1

ROuter-Lampung(config-if)#ip address 192.168.60.13 255.255.255.252

ROuter-Lampung(config-if)#clock rate 64000

ROuter-Lampung(config-if)#bandwidth 1024

ROuter-Lampung(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/0/1, changed state to up

ROuter-Lampung(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to up

ROuter-Lampung(config-if)#exit

ROuter-Lampung(config)#router rip

ROuter-Lampung(config-router)#version 2

ROuter-Lampung(config-router)#network 192.168.10.0

ROuter-Lampung(config-router)#network 192.168.60.12

ROuter-Lampung(config-router)#network 192.168.1.0

ROuter-Lampung(config-router)#redist

ROuter-Lampung(config-router)#redistribute

ROuter-Lampung(config-router)#redistribute static

ROuter-Lampung(config-router)#exit

ROuter-Lampung(config)#ip route 0.0.0.0 0.0.0.0 192.168.60.14

ROuter-Lampung(config)#^Z

%SYS-5-CONFIG_I: Configured from console by console

ROuter-Lampung#copy run start

Destination filename [startup-config]?

Building configuration…

[OK]

ROuter-Lampung#


Router Jakarta :

Router-Jakarta(config)#interface serial 0/0/0

Router-Jakarta(config-if)#ip address 192.168.60.14 255.255.255.252

Router-Jakarta(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down

Router-Jakarta(config-if)#interface fa

Router-Jakarta(config-if)#exit

Router-Jakarta(config)#interface fa

Router-Jakarta(config)#interface fastEthernet 0/0

Router-Jakarta(config-if)#ip address 10.100.100.1 255.255.255.0

Router-Jakarta(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router-Jakarta(config-if)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router-Jakarta#copy run start

Destination filename [startup-config]

Router-Jakarta#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router-Jakarta(config)#ip route 192.168.10.0 255.255.255.0 192.168.60.13

Router-Jakarta(config)#ip route 192.168.1.0 255.255.255.252 192.168.60.13

Router-Jakarta(config)#ip route 172.16.1.0 255.255.255.0 192.168.1.1

Router-Jakarta(config)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router-Jakarta#copy run start

Destination filename [startup-config]?

Building configuration…

[OK]

Router-Jakarta#

Iklan